Snow Blowers

How to Start a Snow Blower? All You Need to Know

/

by Bryan Mckenzie

/

No Comments

Home » Snow Removal » Snow Blowers » How to Start a Snow Blower? All You Need to Know
As an Amazon Associate we earn from commission of qualifying purchases.

A snow blower is an effective tool in winter, especially during intense weather conditions. Having the right tool can help you make the snow removal process quick and easy. Compared to using a shovel, this method is less time-consuming and makes the job more efficient. Whether you have already bought a new machine or are only planning to do it, this article will be useful for you.

How to start a snow blower? Before figuring out how to turn on a snowblower, read the owner or operator’s manual and study all safety instructions, including the need for regular maintenance. If you peruse all the instructions and still have difficulties starting a snowblower, read this article till the end.

How to Start a Snow Blower?

  1. Check the fuel level.
  2. Set the drive control to “neutral,” and the choke to “full.”
  3. Increase the throttle and turn on the fuel shutoff valve.
  4. Hit the ignition switch and insert the keys.
  5. Push the primer bulb.
  6. Pull the starter rope or plug the power cable.
  7. Press the start button, and turn the choke off slowly.

Snowblower Buyer’s Guide

Some snow blowers are easier to use than others. I strongly recommend that you choose a gas-powered machine since it is more powerful and usually works better in difficult situations. You won’t have to bother about electrical outlets either. While gas-powered engines are still the most common ones, there are now a number of high-quality batteries that can match their power and eliminate the need for wires.

Types of snowblowers

Before buying a snowblower, it is necessary to know the average amount of snowfall so that you can pick the machine that fits your needs. Below are the types of snowblowers you can find for different circumstances, ranging from ease of use to the amount of snow the device can handle, so this will help you simplify your decision-making process.

man-and-a-snowblower

  • Single-stage snow blowers. Simple features make single-stage snow blowers ideal for beginners. They are better suited for shallow snow removal;
  • Two-stage snow blowers. A two-stage snow blower can handle heavier snow since it is much more powerful and can clear snow faster than a single-stage model. They can be used on gravel surfaces or grass as well;
  • Three-stage snow blowers. Although the three-stage snow blower is fairly similar to the two-stage model, it features an accelerator. This snow blower is suitable for heavy snow and tough circumstances.

How to start a cold snow blower?

Priming the engine is an essential procedure to perform before using the tool. Make sure that the fuel shutoff valve is in the “ON” position or your throttle is positioned to three-quarter speed or higher. Always make sure that the gas tank isn’t empty. Remember to check the oil every time before use. Remove the spark plug and check for the absence of fuel.

When should you use a snowblower?

When winter arrives, it is necessary to decide how to remove snow from your home area. The majority of people prefer a shovel since it is simple to operate. However, it might not be appropriate when there is heavy snowfall and you have a relatively large territory.

A snow blower is a powerful machine for your land. Starting a snowblower for the first time, you would be surprised how easy and enjoyable this process can be. The device allows you to collect snow without stressing your muscles only by pushing it through the snow and walking.

How to start a snow blower step by step

So that you don’t face the situation when it starts to snow and the snowblower won’t start, follow my simple guide. Get your snowblower up and running in no time.

snowplow-on-asphalt

Step 1: Check for the fuel and oil levels

Always make sure you have fresh gas inside the gas tank. If gas stays there for a long time, you need to refuel the machine with fresh, stabilized gasoline.

Step 2: Set the drive control to “neutral” and the choke to “full”

Once you check on the aforementioned, go ahead and ensure the choke is full. To begin using the machine, flip the switch to the start position after it warms up.

Step 3: Increase the throttle and turn on the fuel shutoff valve

It is important to make sure that the throttle is set to a “HIGH” or “FAST” mode. The fuel shutoff valve must be in the “OPEN” position to start the engine.

Step 4: Hit the ignition switch and insert the keys

You should be able to utilize a safety ignition key. This is an additional element that ensures the machine can be safely started.

Step 5: Push the primer bulb and pull the starter rope

After you do it, plug in the power cable. Pressing the priming bulb allows fuel to enter the carburetor. Pressing this bulb up to three times is often sufficient to start the machine. After completing the aforementioned processes, you can start the engine by pulling the starting rope so that your snow thrower becomes fully operational.

Step 6: Press the “ON” or “RUN” buttons

Click on the start button, which is either “ON” or “RUN,” depending on the model. Turn the choke off slowly when ready to start.

snow-blower-winter

How to start an electric snow blower?

For electric versions, simply plug the starting cable of the snow blower into an extension cord. Ensure that the extension cable is connected to an outlet. Then, simply press the “START” or “RUN” buttons, and the snow blower should run.

FAQ About Starting Snowblower

Below are some queries asked by lots of users online. I hope these answers will be useful for you.

How do you start a snowblower that has been sitting?

Check that all of the switches are positioned correctly and add a stabilizer. Empty the gas tank and fill it again if the gas has been staying idle for too long. The carburetor has to be clean. Inspect the gasoline line and the fuel filter for any signs of damage.

How do you start a snow blower that won’t start?

The most common reasons why that can happen are gas, a spark plug, failed wiring, or an electric starter. Make sure that the tool is fueled with fresh gasoline. Replace the spark plug if it’s damaged.

What do you need to start a snowblower?

Check the fuel and oil levels. Set the drive control to “neutral” and the choke to “full.” Increase the throttle. Turn on the fuel shutoff valve. Hit the ignition switch and insert the keys. Push the primer bulb. Pull the starter rope or plug in the power cable and press “start.”

snowplow-in-a-snowdrift

Were You Successful at Starting Your Snowblower?

Snow blowers come in handy during wintertime. Compared to using a shovel, you can remove a lot more snow with these tools. If you don’t have issues with turning the machine on and providing it with basic care, you will never want to switch to shoveling again. Hopefully, now you can turn on your snow blower easily.

Which type of snow blower do you use now and would you recommend it? Do you find it challenging to turn on your snowblower? Leave a comment below.

About
Bryan Mckenzie
Hi there — my name is Bryan McKenzie. Before I’d got into gardening, I worked as a landscape designer at landscape design and consultation company in Jacksonville. I enjoy sharing the vast gardening experience I’ve accumulated throughout the years with like-minded green thumbs. Read more about me and my wife.
Photo of author

Leave a Comment