Preventing Snow Blower Chute from Clogging: Tips and Tricks

Snow blower chutes are an essential part of clearing snow in areas with heavy snowfall. However, these chutes can often get clogged, causing reduced efficiency and even machine damage. This can be frustrating and time-consuming, especially during the cold winter months. In this article, we will explore the reasons why snow blower chutes get clogged and the potential risks of a clogged chute.

More importantly, we will provide you with step-by-step solutions to prevent this from happening, including choosing the right snow blower for your area, keeping up with maintenance, and using non-stick spray. Additionally, we will offer tips for safe snow blower use to ensure that you and your loved ones stay safe during snow removal.

What is a snow blower chute?

A snow blower chute is a mechanism on a snow blower that disposes of the removed snow by throwing it away from the machine. The chute usually consists of two parts: the deflector and the rotating discharge chute. The deflector controls the height and trajectory of the thrown snow, while the rotating discharge chute rotates continuously to change the direction of the snow.

The direction and height of the snow can be changed using the chute control, which is typically located on the handlebar of the snow blower. The size, shape, and material of the chute vary depending on the type and model of the snow blower. Some chutes are made of metal, while others are made of plastic. The design of the chute can also affect its performance, especially in wet or heavy snow conditions.

Why do snow blower chutes get clogged?

Snow blower chutes can get clogged due to a variety of reasons. Understanding these reasons can help prevent chute clogs and ensure optimal snow removal efficiency. Some of the common reasons why snow blower chutes get clogged include:

• Wet Snow: When the snow is wet and heavy, it is more likely to stick to the chute and accumulate, leading to a clog.
• Too much snow at once: If the snow blower is trying to move too much snow at once, it can overload the machine and cause the chute to clog.
• Unmaintained machine: If the snow blower is not regularly maintained, such as failure to change the oil or replace worn-out parts, it can lead to poor chute performance and increase the likelihood of clogs.

It’s important to remember that a clogged chute not only reduces efficiency but can also pose safety risks and cause machine damage. It’s essential to learn how to prevent chute clogs and how to clear them safely if they occur.

Wet Snow

Wet snow is one of the main reasons why snow blower chutes get clogged. Wet snow is denser and heavier than dry snow, which makes it more difficult to throw. When wet snow enters the chute, it can stick to the chute walls and impeller, causing it to clog. To prevent this from happening, it is important to choose a snow blower that can handle wet snow.

Additionally, using a non-stick spray on the chute walls and impeller before removing wet snow can help prevent clogging. In some cases, it may also be helpful to reduce the speed of the snow blower when removing wet snow to prevent it from clogging the chute. By taking these precautions, you can ensure that your snow blower operates efficiently and effectively, even in wet snow conditions.

Too much snow at once

When too much snow is fed into the snow blower at once, it can overwhelm the machine’s capacity and cause the chute to become clogged. This can happen even with high-end snow blowers that are designed to handle large amounts of snow. To prevent this from happening, it’s important to be aware of your snow blower’s capacity and not try to clear too much snow at once. Below are some additional tips to prevent clogging due to too much snow:

• Start with a lower gear and gradually increase speed as you clear the snow
• Clear the snow in parallel lines rather than trying to remove it all in one pass
• Adjust the height of the snow blower to cut through the snow effectively without overburdening the machine
• Consider investing in a snow cab or similar attachment to improve visibility and accuracy while clearing snow

By following these tips, you can prevent your snow blower chute from becoming clogged due to too much snow intake and improve the effectiveness and longevity of your machine.

Unmaintained machine

When a snow blower is not maintained properly, it can lead to a clogged chute. One of the most common issues with an unmaintained machine is a dull or damaged auger. The auger is responsible for scooping up the snow and pushing it towards the chute. If the auger is not functioning properly, it can cause the snow to become compacted, making it harder for the snow blower to dispose of the snow through the chute.

Additionally, a worn or damaged chute can also contribute to clogging. If the chute is bent or damaged, it can cause the snow to get stuck in the chute and reduce the efficiency of the machine. Another issue with an unmaintained machine is clogged air filters. If the air filters are not cleaned or replaced regularly, they can become clogged with debris and reduce the power of the snow blower.

Finally, improperly adjusted skid shoes can cause the snow blower to scrape the ground, picking up gravel or other debris and clogging the chute. It is important to keep up with regular maintenance, including checking the auger, inspecting the chute, cleaning or replacing air filters, and adjusting skid shoes as necessary, to prevent a clogged chute.

What happens when the chute gets clogged?

When the snow blower chute gets clogged, there can be a few consequences, including reduced efficiency, possible machine damage, and safety risks.

Firstly, a clogged chute can reduce the snow blower’s efficiency as it prevents the snow from being thrown out of the machine. This means you have to stop frequently and clear the chute manually, which can be time-consuming and exhausting.

Secondly, a clogged chute can cause damage to the machine if not cleared promptly. The added pressure on the motor can cause it to overheat, and the auger blades might get damaged if they are forced to work harder to remove snow.

Finally, a clogged chute can pose safety risks by potentially throwing snow in an unexpected direction or even ricocheting off objects. This can damage property or hurt someone, so it’s crucial to keep the chute clear at all times to prevent these safety hazards.

Reduced Efficiency

When a snow blower chute gets clogged, the efficiency of the machine reduces significantly. The snow blower struggles to remove snow, which results in longer clearing time and a higher chance of the snow blower getting damaged. This is because the clogged chute limits the amount of snow that can pass through the machine, causing the snow blower to work harder than usual.

As a result, the machine’s motor can overheat, belts can break, and other critical components can fail. By preventing the chute from getting clogged, you can maintain the machine’s efficiency and prolong its lifespan. This article will provide you with practical solutions to avoid chute clogs, reducing the risk of reduced efficiency and potential machine damage.

Possible Machine Damage

Possible machine damage is another risk associated with a clogged snow blower chute. When snow accumulates in the chute, it can cause excessive strain on the machine’s engine and other components, leading to overheating or even mechanical failure.

Additionally, the buildup of snow can cause the auger blades to stop functioning, which can further damage the machine. Ignoring a clogged chute can lead to costly repairs or even the need to replace the snow blower altogether. It is essential to prioritize chute clearing to prevent machine damage and ensure longevity. Regular maintenance, such as oiling, cleaning, and inspection, can also help prevent damage to the snow blower.

Safety risks

A clogged snow blower chute poses several safety risks, which should not be ignored. When the chute is clogged, snow can build up around the blades and impeller, increasing the chances of the machine overheating and breaking down. This can send snow and debris flying in all directions, potentially injuring the operator or nearby individuals.

Additionally, a clogged chute can cause the snow blower to become unbalanced, increasing the risk of tipping over. The operator may also be forced to use excessive force to try and clear the chute, which can lead to muscle strains and other injuries. Finally, if the chute is not properly cleared before starting the machine, it can cause rocks, sticks, and other debris to be thrown from the snow blower.

As a result, it is essential to take safety precautions, especially when dealing with a clogged chute. Turning off the machine, using a stick or other object to clear the area, and never using hands or feet to clear the chute are some of the measures that can be taken to prevent accidents. Remember, your safety should always come first.

If you’re looking for the best single-stage snow blower and need some guidance on how to choose the right one, we have just the resource for you. Check out our comprehensive guide on “Best Single-Stage Snow Blower: How to Choose?” to make an informed decision for your snow-clearing needs.

How to Prevent Snow Blower Chute from Clogging

Preventing snow blower chute clogs is crucial to maintain efficiency and safety during snow removal. Here are some ways to prevent a snow blower chute from clogging:

• Choose the right snow blower for your area: Consider the amount and type of snow your area usually gets. If you live in an area with heavy and wet snowfall, choose a snow blower with a powerful engine and an easily adjustable chute.
• Keep up with maintenance: Regular maintenance, such as oil changes and belt replacements, can prevent clogs in the chute. Make sure to follow the manufacturer’s instructions for maintenance and store the machine in a dry place to prevent rust.
• Use a non-stick spray: Applying a non-stick spray, such as silicone spray or cooking oil, to the inside of the chute can help prevent snow from sticking and causing clogs.
• Clear snow frequently: Clear snow regularly, especially after heavy snowfall. Do not wait for the snow to pile up before using the snow blower as this can cause clogs and damage the machine.
• Snow throwing technique: Aim the chute away from people and objects, and try to throw the snow in a smooth and constant manner instead of jerky movements. This can prevent clogs and improve the efficiency of the machine.
• Know your snow blower’s limit: Do not push your snow blower beyond its limit as this can cause damage and clogs in the chute. If your machine is struggling or not throwing snow as far as it used to, it may be time to upgrade or service it.

Choose the right snow blower for your area

Choosing the right snow blower for your area can make a significant difference in preventing your chute from clogging. Consider the amount of snowfall, the type of snow, as well as the size and slope of your driveway or sidewalk.

A single-stage snow blower is ideal for areas with light to moderate snowfall and flat surfaces. It uses an auger to pick up the snow and throw it out of the chute.

A two-stage snow blower is better for areas with heavy snowfall and uneven terrain. It uses an auger to pick up the snow and a separate impeller to throw it out the chute.

A three-stage snow blower is ideal for areas with wet and heavy snow, as it has an additional accelerator that breaks up the snow before it goes through the impeller. In addition to choosing the right type of snow blower, consider the width and clearing depth, as well as the engine power. A wider clearing area and a powerful engine can make snow removal faster and more efficient.

Keep up with maintenance

Keeping up with snow blower maintenance is crucial to prevent chute clogging and ensure optimal performance. The following maintenance tasks should be regularly performed:

• Change the oil: Most snow blowers require oil changes every 20-25 hours of use or once a year. Lubricating the engine ensures that it runs smoothly and efficiently.
• Check and replace air filters: Dirty air filters can reduce airflow, leading to overheating and engine damage. It is recommended to check and clean the air filters after every use, and replace them at least once a year.
• Inspect the spark plug: A worn or dirty spark plug can decrease engine power and fuel efficiency. It’s advised to inspect the spark plug after 50 hours or at least once a year, and replace it if necessary.
• Check the belts and pulleys: Belts and pulleys should be inspected for damage or wear, and replaced if necessary. These components are responsible for transferring power from the engine to the snow blower’s auger and impeller, so any issues can affect its performance.
• Grease moving parts: Lubricating moving parts can prevent metal-to-metal friction, which can cause damage. It is recommended to lubricate exposed metal parts, such as pivot points, once a year.

By performing these maintenance tasks, you can ensure that your snow blower operates efficiently and reduces the chances of chute clogging.

Use a non-stick spray

Using a non-stick spray on your snow blower chute can be an effective way to prevent clogging. The spray acts as a barrier between the snow and the walls of the chute, reducing the amount of snow that sticks and builds up. Here are some steps to follow when using a non-stick spray:

• Select the right spray: Make sure to choose a non-stick spray that is designed for cold temperatures and is safe for use on plastic and metal surfaces. Look for sprays that are specifically made for snow blowers and that come with an applicator.
• Clean the chute: Before applying the spray, clean the inside walls of the chute using a stick or scraper to remove any snow build-up or debris. This will ensure that the spray adheres properly.
• Apply the spray: Shake the can well before use and aim the applicator at the inside walls of the chute. Spray evenly and thoroughly, making sure to coat all surfaces. Avoid spraying any part of the engine or moving parts of the snow blower.
• Reapply as needed: If you notice that snow is starting to stick to the walls of the chute again, reapply the spray as needed to maintain the non-stick barrier.

Using a non-stick spray can be a simple and effective solution to prevent snow blower chute clogging. It is important to follow the steps carefully to ensure that the spray is applied correctly and safely.

Clear snow frequently

One of the most effective ways to prevent a snow blower chute from getting clogged is to clear snow frequently. This is especially true when dealing with wet or heavy snow. When the snow is allowed to accumulate, it can become compacted and difficult to remove, increasing the chances of the chute getting clogged. To prevent this from happening, it is best to clear snow in short intervals rather than waiting for a large accumulation.

The frequency of snow clearing should be determined by the amount of snowfall in your area and the size of your property. To clear snow efficiently, it is important to use the snow blower in a consistent pattern, such as working from side to side or in a zigzag pattern. This will ensure that the snow is cleared evenly, reducing the chances of a clogged chute. It is also important to make sure that the snow blower is not overloaded with snow.

Trying to clear too much snow at once can put undue stress on the machine, making it more likely to clog. Additionally, it is important to be aware of any obstacles or debris that may be in the snow, such as sticks or rocks. These objects can damage the snow blower and cause the chute to clog.

Snow throwing technique

To prevent your snow blower chute from clogging, you need to master the proper snow-throwing technique.

Firstly, it’s essential to aim the chute away from people, pets, and windows to avoid any injury or damage.

Secondly, to achieve maximum distance, gradually increase the speed of the snow blower while throwing the snow.

Thirdly, it’s recommended to make a few passes over the same area to remove all the snow completely.

Finally, always keep the snow blower moving rather than leaving it idle, as an idle machine can cause snow buildup in the chute.

Remember that uneven terrain or areas with rocks or debris can damage your snow blower and cause the chute to clog, so it’s important to be mindful of your surroundings while using the snow blower. By following these techniques, you can ensure that snow removal is done effectively and without any complications.

Know your snow blower’s limit

Knowing your snow blower’s limit is crucial to prevent the chute from clogging. Each snow blower is designed to handle a specific amount of snow depending on its size and horsepower. Exceeding this limit can cause the machine to overwork, leading to reduced efficiency and potential clogging of the chute.

Additionally, trying to clear snow that is too heavy or dense for your snow blower can also cause damage to the machine and put you at risk of injury. It is important to refer to the manufacturer’s recommendations for the maximum snow capacity of your snow blower and avoid exceeding it. If you need to clear an area with more snow than your machine can handle, it is better to divide the work into smaller sections and take breaks in between.

This prevents the chute from clogging and ensures that the snow blower is being used efficiently and safely. Remember, it is always better to take precautions rather than risk injury or damage to your machine.

What to do if your chute gets clogged?

If your snow blower chute gets clogged, it can be a frustrating and potentially dangerous situation. Here are the steps you should take to clear a clogged chute safely:

1. Turn off the machine: The first step is to turn off the snow blower and wait for all moving parts to come to a complete stop.
2. Clear the area with a stick or other object: Using a long stick or another suitable object, clear the chute of any snow or debris that is causing the clog. Be careful not to damage the chute or the blades in the process.
3. Do not use your hands or feet to clear the chute: Never attempt to clear the chute with your hands or feet, as this can result in serious injury. Always use a long stick or other object to clear the clog.
4. Restart the machine: Once the chute is clear, restart the snow blower and resume clearing the snow, being careful to monitor the chute for any further clogs.

It’s important to note that prevention is key to avoiding a clogged chute in the first place. Be sure to follow the preventative steps outlined in this article to minimize your risk of experiencing a clogged chute while operating your snow blower.

Turn off the machine

If your snow blower chute gets clogged, it’s crucial to turn off the machine before attempting to clear it. This not only prevents any further snow from entering the chute but also ensures your safety. Before turning the machine off, make sure to release the auger and impeller control, so they don’t keep spinning after the machine is turned off. This can cause injury if you attempt to clear the chute while the impeller is still turning.

Once the machine is turned off, identify the location of the clog, and carefully remove it using a stick or other object. Never use your hands or feet to clear the chute, as this can cause serious injury. After clearing the chute, restart the machine and set the chute direction and height to your desired position, ensuring that it throws the snow in the intended direction.

Clear the area with a stick or other object

If your snow blower chute does get clogged, it’s essential to know how to clear the blockage safely. The first step is to turn off the machine to prevent injury. Then, using a stick or other object, clear the area around the chute. Be careful not to put your hands or feet near the chute, as this could cause severe injury. It’s important to note that you should never clear the chute with your hands or feet, as this could lead to serious harm.

Use a long, sturdy stick to break up the ice or snow that is causing the clog, making sure to push the debris out of the chute. Once the clog is cleared, turn on the machine, and resume snow removal. Regularly checking the chute during use can also help prevent clogging and avoid having to clear it with a stick or other object.

Do not use your hands or feet to clear the chute

If your snow blower chute does become clogged, it is important to know how to safely clear it to avoid injury or damage to your machine. One important safety rule to follow is to never use your hands or feet to clear the chute. This may seem like common sense, but the temptation to use your hands to clear a clog can be strong, especially if you are in a hurry to finish clearing your driveway.

However, the rotating blades inside the chute can easily cause serious injury if they come into contact with your hands or feet. Instead, turn off the snow blower and unplug it if necessary. Then, use a long stick or other tool to carefully clear the clog from outside the chute. Do not lean over or reach into the chute, even if the snow blower is turned off. Once the clog is cleared, restart the machine and resume snow blowing, making sure to keep your hands and feet safely away from the chute at all times.

Restart the machine

After clearing the chute, it is essential to restart the snow blower properly. First and foremost, ensure that all moving parts are clear of any obstruction before restarting the engine. Additionally, make sure the throttle control is set to the correct position, and the choke is in the off position.

Typically, it is recommended to wait for a few minutes before restarting the snow blower. This is because restarting immediately may cause the engine to flood. If the engine does not start on the first attempt, wait for another few minutes before attempting to start it again.

The snow blower may require several attempts to start after being clogged, especially if the engine has been flooded. Finally, be sure to double-check that the debris has been cleared from the chute before engaging the snow blower again. Not clearing the chute properly before restarting the machine can lead to further clogging or machine damage.

Check out our article on the “Best Corded Snow Blower for Your Home” to discover the most reliable and efficient options on the market. From their robust motors to their user-friendly features, these snow blowers will ensure you can effortlessly clear your driveway, walkways, and pathways during the winter season.

Tips for Safe Snow Blower Use

Snow blowers can be a very useful tool for clearing snow, but using them improperly can be dangerous. Here are some tips for safe snow blower use:

• Wear protective clothing: Always wear appropriate clothing, such as gloves, boots, and warm clothing. Protect your eyes with goggles or sunglasses to prevent snow from getting in. Use ear protection if the snow blower is too loud.
• Remove debris before use: Make sure the area you are clearing is free from any obstacles, such as rocks, sticks, or other debris that could be picked up by the snow blower and thrown out.
• Keep children and pets away: Never allow children or pets to play near or operate the snow blower, and always keep a safe distance away from it yourself.
• Never leave the snow blower unattended: Always turn off the machine and wait for all moving parts to come to a complete stop before leaving it unattended.

By following these tips, you can reduce the risk of accidents and ensure a safe and efficient snow removal process.

Wear protective clothing

When using a snow blower, it is important to wear protective clothing to minimize the risk of injury. This can include a heavy coat, gloves, insulated pants, boots, and eye and ear protection. The coat and pants should be both waterproof and windproof to protect from the cold and wet snow. Gloves should be insulated and made of a material that allows for grip while handling the snow blower. Boots should be waterproof and slip-resistant to prevent falling on slick surfaces.

Additionally, eye protection should be worn to protect from flying debris, and ear protection can minimize hearing damage from the loud noise of the machine. By taking these precautions and wearing protective clothing, you can not only stay warm and dry but also ensure safety while using your snow blower.

Remove debris before use

Before using your snow blower, it’s essential to remove any debris from the area you plan to clear. This includes rocks, branches, and other objects that could damage the machine or become hazardous projectiles when caught by the snow blower’s auger. Failure to remove debris can lead to significant damage to the machine and, in extreme cases, serious injury. Here are some steps to take before using your snow blower:

• Inspect the area: Take a walk through the area you plan to clear and look for any large debris that could pose a risk. Remove any branches, rocks, or other objects that could get caught in the snow blower’s auger.
• Check for hidden objects: Even if the area appears clear, it’s always a good idea to check for hidden objects that could be buried under the snow. Use a long stick or other object to probe the snow and look for any obstructions.
• Clear the area: Once you’re sure that the area is free of debris, clear any loose snow from the surface. This will help prevent the snow blower’s auger from picking up objects that may have been hidden in the snow.

By taking a few extra minutes to remove debris before using your snow blower, you can help prevent damage to your machine and keep yourself and others safe during snow removal.

Keep children and pets away

When using a snow blower, it’s essential to keep children and pets away from the area to prevent accidents and injuries. The sharp blades and moving parts of a snow blower can cause serious harm if they come in contact with a child or pet. Here are some tips to keep children and pets safe while using a snow blower:

• Create a barrier: Use flags, cones, or ropes to create a barrier around the area where you will be using the snow blower. This will prevent children and pets from getting too close to the machine.
• Keep the area clear: Remove any toys, rocks, sticks, or other debris from the area before using the snow blower. These objects can get caught in the machine and cause damage or injury.
• Supervise children: If you must clear snow with children around, make sure they remain at a safe distance and are supervised by an adult at all times.
• Store the snow blower properly: After use, store the snow blower in a safe and secure location where children and pets cannot access it.

Remember to always prioritize safety when using a snow blower. Keeping children and pets away from the area is crucial to avoid accidents and injuries.

Never leave the snow blower unattended

Leaving a snow blower unattended can be dangerous and can cause accidents. It is important to always turn off the machine and take the key out of the ignition before leaving it. Additionally, follow these steps to ensure safety when leaving your snow blower:

• Clear the snow blower of any debris: Before leaving the machine, make sure there are no sticks, rocks, or other debris near or on the machine that could be sucked up and damage the snow blower or hurt someone when restarted.
• Store the snow blower properly when not in use: When not in use, store the snow blower in a dry and secure area that is not accessible to children or pets. Lock the machine with a key if possible.
• Do not leave the snow blower running unattended: Never leave the snow blower running unattended, even for a short amount of time. This can be tempting during long snow removal sessions, but it poses a significant safety risk and can also cause mechanical problems for the machine.
• Keep the snow blower away from flammable materials: Ensure that the snow blower is not close to flammable materials such as gasoline, oil, or other chemicals that could ignite and cause a fire.

By following these precautions, you can help prevent accidents and ensure the safety of both yourself and others when using a snow blower.

If you’re looking for the best gas snow blower for your winter needs, look no further. We have compiled a comprehensive list of top-rated models in our article “Best Gas Snow Blower Reviews & Buyer’s Guide“. Whether you’re dealing with heavy snowfall or simply want to make your snow-clearing tasks easier, this guide will help you make an informed decision.

Conclusion

In conclusion, preventing snow blower chute clogs is essential to ensure efficient and safe snow removal. By choosing the right snow blower for your area, keeping up with maintenance, using non-stick spray, clearing snow frequently, and knowing your snow blower’s limit, you can significantly reduce the risk of chute clogs. If your chute does get clogged, it’s important to turn off the machine, clear the area with an object, and never attempt to clear it with your hands or feet.

Following these steps will prevent potential injuries and machine damage. Remember to also follow our tips for safe snow blower use, such as wearing protective clothing, removing debris before use, keeping children and pets away, and never leaving the snow blower unattended. By practicing safe snow blower use and preventive maintenance, you can stay warm and safe during the winter months.

Frequently Asked Questions

How can I tell if my snow blower chute is clogged?

You can usually tell if your snow blower chute is clogged if snow is not being thrown as far or at the height you set using the chute control. You may also hear a different sound coming from the machine.

What should I do if I notice my snow blower chute is clogged?

If you notice that your snow blower chute is clogged, turn off the machine immediately and follow the steps for clearing the chute.

Can use a non-stick spray on the chute really prevent clogging?

Yes, using a non-stick spray on the chute can prevent clogging by reducing the amount of snow and ice that sticks to the chute.

Can I use my snow blower on gravel or other non-paved surfaces?

You should avoid using your snow blower on gravel or other non-paved surfaces, as rocks or other debris can be picked up and thrown, causing damage or injury.

How often should I be maintaining my snow blower?

You should be maintaining your snow blower before and after each snow season, and as needed throughout the season to ensure optimal performance and prevent issues such as clogging.

Can I use my snow blower on wet snow?

Yes, most snow blowers can handle wet snow, but it is important to adjust the chute height and speed to avoid clogging.

What should I do if my snow blower stops throwing snow during use?

If your snow blower stops throwing snow during use, turn off the machine and clear the chute of any obstructions before restarting the machine.

Why is it important to wear protective clothing when using a snow blower?

Wearing protective clothing like gloves, eye protection, and sturdy footwear can prevent injuries from flying debris or accidents while using the snow blower.

Why is it important to clear debris before using a snow blower?

Clearing debris such as sticks and rocks from the snow removal area can prevent damage to the machine and injury to the operator or others nearby.

What should I do if my snow blower still won’t start after following all maintenance guidelines?

If your snow blower still won’t start after following all maintenance guidelines, it may be best to take it to a professional for repairs or troubleshooting.

References

• 5 EASY Snowblower Tips | STOP Clogging that CHUTE!